Store

0

R2-500X1

02002
C$0.00
Pre-order
1
Product Details

R2-500X1

  • Prime 500 Watt Mono Amplifier
    • The R2 models were developed for car audio fanatics that want a reliable amplifier – with all the power and performance you’ve come to expect from Rockford Fosgate – at an economical price. Rockford Fosgate amplifiers are renowned world-wide for being “under rated,” easily surpassing all specifications, and most importantly, generating more power than their ratings. These 3rd generation of Prime Series amplifiers are refined with the latest Rockford Fosgate technology for easy setup and configuration, making them perfect for use with factory audio or custom aftermarket systems.

PLEASE CALL FOR PRICING.

General Features
  • Variable Input Gain adjustment level
  • High Level Input Capable
  • Balanced Differential Inputs with RCA Pass Through Outputs
  • Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power)
  • Includes RLC Remote Level Control
  • Top Mounted Control Panel
  • Features C.L.E.A.N. Set-up
  • Variable Infrasonic Filter
  • Short Circuit & Over Current Protection
  • Cast aluminum heat sink
  • Continuously Variable On Board Punch EQ
  • Rollback Protection
  • CEA-2006 Compliant & CE Compliant
  • Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
  • Class-D Topology
  • 1 Year Warranty
Technologies



CTA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CTA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.



P.O.W.E.R.

Power supply circuit design that allows the amplifier to increase output power as voltage increases.



Class-D

High efficiency amplifier design that reduces current consumption from the charging system.



C.L.E.A.N. Set-Up

C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is a patented circuit with in/out clip LEDs to help match a source to amp and optimize output.



Balanced Differential Inputs

Differential inputs eliminate noise picked up by signal cables.



MEHSA 4 (Maximum Efficiency Heat Sink Application)

MEHSA4 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.



NOMAD

NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.



Rollback Protection

During demanding musical conditions, the amplifier can dynamically reduce demand to prevent stress on the output devices.

CE Compliant

This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).

Specifications
  • Cta-2006 Compliant
  • Number of Channels
    • 1
  • Total Power (Sum of Rated Power)
    • 500 Watts
  • Rated Power (RMS Continuous Power)
    • 300 Watts x 1 @ 4Ω
    • 500 Watts x 1 @ 2Ω
  • Dynamic Power (PVC/PowerCube®)
    • 350 Watts x 1 @ 4Ω
    • 590 Watts x 1 @ 2Ω
  • Bridgeable
    • No
  • Frequency Response
    • 20 Hz - 250 Hz
  • Input Sensitivity
    • Low-Level: 150 mV - 4 V
    • High-Level: 450 mV - 12 V
  • Circuit Topology Class
    • Class-D
  • Efficiency (average)
  • Total Harmonic Distortion (THD+Noise)
    • 4Ω: <1.0%
    • 2Ω: <1.0%
  • Signal Input
    • Low-Level: 2 RCA
    • High-Level: 4-Pin Molex
  • Signal Output
    • Low-Level: 2 RCA (Pass-Thru active with RCA or Hi-Level input)
  • Tone Controls
    • 0 to +18 dB @ 45 Hz
  • Crossover Controls
    • Low-Pass: 50 Hz - 250 Hz @ 12dB/Octave Butterworth
    • Infrasonic: 15 Hz - 40 Hz @ 12dB/Octave Butterworth
  • Remote Controls
    • Yes
  • Visual Indicators
    • Power/Protect
    • C.L.E.A.N. In
    • C.L.E.A.N. Out
  • Power Wire Gauge
    • 4 AWG
  • Power Input Connector
    • Compression Terminal Block
  • Speaker Wire Gauge
    • 8 AWG
  • Speaker Output Connector
    • Compression Terminal Block
  • Cooling
    • Convection
  • Heatsink
  • Operating Voltage
    • 9 - 16 VDC
  • Recommended Fuse (not included)
    • 80 A
  • Average Current Draw (13.8V Music)
  • Max. Current Draw (13.8V Sinewave)
    • 52 A
  • Suggested Alternator
  • Included In The Box
  • Dimensions (H x W x D)
    • 1.9" x 6.8" x 8.5"
    • (4.9 cm x 17.3 cm x 21.5 cm)
  • Shipping Weight
Support

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.

Wiring Wizard

Available Wiring Diagrams

Please consult your amplifier owner's manual for lowest recommended impedance.

The below diagrams produce optimum power into a 2-ohm mono load.


Wiring Diagram #1


Wiring Diagram #2


Wiring Diagram #3


Wiring Diagram #4


Wiring Diagram #5


Wiring Diagram #6


Wiring Diagram #7


Wiring Diagram #8


Wiring Diagram #9


Wiring Diagram #10


Wiring Diagram #11

Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

Save this product for later

Exceptional Sound Quality

Auto Sound Design – a friendly, locally-owned company specializing in audio installation and equipment. We value quality and believe that our customers should have the best sound systems in their vehicles. Our top of the line technologies and personalized solutions make us a top choice for anyone looking to upgrade their audio system in their vehicles, we even do audio installations for boats!

Shop Now

FAQs

  • What payment methods do you accept?

    When purchasing an audio installation or audio equipment we accept all major credit and debit cards, including but not limited to Express, Amex, Visa, and Mastercard. Additionally, we accept payment for audio installations and equipment via PayPal for the convenience of our customers. 

  • What shipping methods do you use?

    We ship all of our audio installation equipment via the Canada Post. All shipping rates for our audio installation equipment are calculated by Canada Post and determined by the size, shape, and weight of the order.

  • What if my product arrives damaged?

    We apologize if you receive any damaged audio installation equipment. Please contact us as soon as possible so we may assist in finding a solution.

  • What is your return policy?

    We offer a 30-days after purchase return policy on our audio installation equipment. If you're looking to return any audio installation equipment, please email or call us with your name, order number, the reason for returning, and product name.

  • Privacy Policy

    Our audio installation site does not sell your information to any third parties. Our website is 100% secure and we only ask for your contact information, such as phone number and email, so that we can contact you about your order, or if you have any questions. We do not sell this information. We do not require any other additional information such as social security numbers. At check-out, we require credit card information for payment processing, but this information will not be stored or shared by the company. Personal information such as name and address will also be kept private under our privacy policy guidelines.

  • Terms of Use

    All images and information on this website are either property of Auto Sound Design or licensed. When visiting our audio installation site all customers are agreeing to appropriately use all content and follow all copyright laws. If any image or content is found to be used without permission legal action may be brought against the offender.

Share by: