Store

0

PM300X1

02168
C$0.00
Pre-order
1
Product Details

PM300X1

  • Punch Marine 300 Watt Full-Range Mono Amplifier
    • The PM300X1 is perfect for use as a dedicated subwoofer or center channel amplifier. Regardless if you're driving multiple speakers or just one, the hefty 2-ohm capability will deliver the right amount of PUNCH that you want! Now, thanks to its small chassis design, it will also fit where traditional amplifiers cannot.

PLEASE CALL FOR PRICING.

General Features
  • Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
  • RCA pass-thru outputs
  • High level input capable with Auto Turn-On circuit
  • On-board Punch EQ with +18dB boost @ 45Hz
  • Short circuit protection
  • Features C.L.E.A.N. Set-up
  • 12dB/octave Butterworth crossover
  • Stealth top mounted control panel
  • Marine grade two part epoxy coating on circuit boards
  • Cast aluminum heatsink
  • Muted turn on
  • Over current protection
  • Marine grade stainless steel hardware
  • 2-Year Warranty
Technologies



CTA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CTA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.



CE Compliant

This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).



TRANS•ana

Trans•ana is a Class A/B topology that simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality.



Balanced Differential Inputs

Differential inputs eliminate noise picked up by signal cables.



DTM

Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.



Element Ready™ | Amps

All components are protected against harsh outdoor elements like Dust, UV, Temperature, Water, Corrosion & Vibration.



DSM

DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.



MEHSA3

MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.



NOMAD

NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.



Engineered In The USA

These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered this fanatic product. This statement illustrates our commitment to being Designed and Engineered in the U.S.A.

C.L.E.A.N. Set-Up

C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is a patented circuit with in/out clip LEDs to help match a source to amp and optimize output.

Specifications
  • Cta-2006 Compliant
  • Number of Channels
    • 1
  • Total Power (Sum of Rated Power)
    • 300 Watts
  • Rated Power (RMS Continuous Power)
    • 200 Watts x 1 @ 4-Ohm
    • 300 Watts x 1 @ 2-Ohm
  • Dynamic Power (PVC/PowerCube®)
    • 260 Watts x 1 @ 4-Ohms 0° Res
    • 444 Watts x 1 @ 2-Ohms 0° Res
  • Bridgeable
    • No
  • Frequency Response
    • 20Hz to 20kHz +/- 1.0dB
  • Input Sensitivity
    • 150 mV - 12 V
  • Circuit Topology Class
    • Class A/B
  • Efficiency (average)
    • 74% @ 4-Ohm
  • Total Harmonic Distortion (THD+Noise)
    • 4-Ohm: <1.0%
    • 2-Ohm: <1.0%
  • Signal Input
    • Hi/Low level: 1 RCA pair
  • Signal Output
    • Low Level: 1 RCA Pair
  • Tone Controls
    • Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
    • Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
    • Function depends upon LP/AP/HP switch position
  • Crossover Controls
    • High-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
    • Low-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
    • All-Pass: Yes
  • Remote Controls
    • Optional Punch Level Control (PLC2) Ready
  • Visual Indicators
    • Power/Protect/Thermal LED
    • Input Clip LED3
    • Output Clip LED1,2,3
    • LED Color Legend:
    • 1BLUE: <0.5% THD
    • 2VIOLET: 1% THD
    • 3RED: 10%+ THD
  • Power Wire Gauge
    • 8 AWG to 4 AWG
  • Power Input Connector
    • Captive C-Clamp
  • Speaker Wire Gauge
    • 8 AWG to 18 AWG
  • Speaker Output Connector
    • Captive C-Clamp
  • Cooling
    • Convection
  • Heatsink
  • Operating Voltage
    • 9 - 16 VDC
  • Recommended Fuse (not included)
    • 50 A
  • Average Current Draw (13.8V Music)
    • 23 A
  • Max. Current Draw (13.8V Sinewave)
    • 45 A
  • Suggested Alternator
    • 75 A
  • Included In The Box
    • Dimensions (H x W x D)
    • 2.38 x 7.76 x 9.86 (in)
    • 6.05 x 19.71 x 25.04 (cm)
  • Shipping Weight
    • 9.5 Lbs. (4.30 Kg.)
Support

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.

Wiring Wizard

Available Wiring Diagrams

Please consult your amplifier owner's manual for lowest recommended impedance.

The below diagrams optimize this amp for its lowest recommended MONO load.


Wiring Diagram #1


Wiring Diagram #2


Wiring Diagram #3


Wiring Diagram #4


Wiring Diagram #5


Wiring Diagram #6


Wiring Diagram #7


Wiring Diagram #8


Wiring Diagram #9


Wiring Diagram #10


Wiring Diagram #11

Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

Save this product for later

Exceptional Sound Quality

Auto Sound Design – a friendly, locally-owned company specializing in audio installation and equipment. We value quality and believe that our customers should have the best sound systems in their vehicles. Our top of the line technologies and personalized solutions make us a top choice for anyone looking to upgrade their audio system in their vehicles, we even do audio installations for boats!

Shop Now

FAQs

  • What payment methods do you accept?

    When purchasing an audio installation or audio equipment we accept all major credit and debit cards, including but not limited to Express, Amex, Visa, and Mastercard. Additionally, we accept payment for audio installations and equipment via PayPal for the convenience of our customers. 

  • What shipping methods do you use?

    We ship all of our audio installation equipment via the Canada Post. All shipping rates for our audio installation equipment are calculated by Canada Post and determined by the size, shape, and weight of the order.

  • What if my product arrives damaged?

    We apologize if you receive any damaged audio installation equipment. Please contact us as soon as possible so we may assist in finding a solution.

  • What is your return policy?

    We offer a 30-days after purchase return policy on our audio installation equipment. If you're looking to return any audio installation equipment, please email or call us with your name, order number, the reason for returning, and product name.

  • Privacy Policy

    Our audio installation site does not sell your information to any third parties. Our website is 100% secure and we only ask for your contact information, such as phone number and email, so that we can contact you about your order, or if you have any questions. We do not sell this information. We do not require any other additional information such as social security numbers. At check-out, we require credit card information for payment processing, but this information will not be stored or shared by the company. Personal information such as name and address will also be kept private under our privacy policy guidelines.

  • Terms of Use

    All images and information on this website are either property of Auto Sound Design or licensed. When visiting our audio installation site all customers are agreeing to appropriately use all content and follow all copyright laws. If any image or content is found to be used without permission legal action may be brought against the offender.

Share by: