P3SD2-12
P3SD2-12
- Punch 12" P3S Shallow 2-Ohm DVC Subwoofer
- The Rockford Fosgate P3S 12" shallow mount subwoofer delivers Punch, even in depth limited situations. Rockford Fosgate understands all vehicles are not the same, because some cannot accommodate deep subwoofers. In the past, that meant no Bass. Not anymore! Now even depth challenged vehicles can have REAL Bass and the Dual Voice Coil allow configurations for every application. Shallow woofers are specifically designed for spaces where a traditional woofer cannot be used.
PLEASE CALL FOR PRICING.
General Features
- Diamond cut cast aluminum trim ring with optional grille
- Dual linear spider with embedded 16 AWG tinsel leads
- StampCast basket with integrated spider venting
- M-Roll Santoprene™ surround
- Shallow Motor Assembly
- Anodized aluminum cone and dustcap
- Optimized for both sealed and vented enclosures
- 1 Year Warranty
Technologies
CEA-2031
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards.
Stitched Tinsel Leads
Improved reliability and performance by reducing fatigue and possible shorting.
Klippel Verified
Klippel is a speaker certification program allowing us to deliver the best possible subwoofers.
Anodized Aluminum Voice Coil Former
Rockford Fosgate subwoofers use anodized aluminum voice coil formers that provide superior heat dissipation (up to 100° at full power levels). Unlike traditional plastic substitutions, aluminum acts like a heat-sink to quickly dissipate thermal build-up on the voice coil. This keeps subwoofers cool during high SPL conditions.
VAST Surround - Subs
The Vertical Attach Surround Technique significantly increases a subwoofer's effective radiating cone area up to 25%.
The slot mounted frame pattern allows fine-tuning of the subwoofer's mounting position.
Specifications
- Power Handling (Watts RMS)
- 400 Watts RMS
- 800 Watts Max
- Size
- 12"
- Nominal Impedance
- Dual 2-Ohm
- Magnet Weight (oz)
- 51 oz. (1.45 kg.)
- Voice Coil Diameter
- 2.5" (65.5 mm)
- Shipping Weight
- 13.25 Lbs. (6.01 kg.)
- Fs (Hz)
- 34
- Qts
- 0.67
- SPL (dB @ 1w/1m)
- 85
- Cutout Diameter
- 11.22 in. (285.0 mm)
- Woofer Displacement
- 0.086 cu. ft. (2.45 Liters)
- Vas (Liters)
- 35.3
- Speaker Connector
- Dual 10 AWG Compression
- Qes
- 0.75
- Mounting Depth
- 3.65 in. (92.5 mm)
- Qms
- 6.60
- Xmax (mm)
- 8.4
- CEA-2031 Compliant
- Re (Ohms)
- 3.40
- Le (mH)
- 2.8
- Sd (cm2)
- 500
- Subwoofer Type
- Shallow
- Voice Coil Type
- Dual Voice Coil
- Sealed Box Volume (Vb)
- 1.0 cu. ft. (28.3 Liters)
- Vented Box Volume (Vb)
- 1.25 cu. ft. (35.3 Liters)
Support
Knowledge Base Articles
- 2016 Updated Subwoofer Displacement - Installation Advisory
- 2012 Punch P3 Shallow Subwoofers - owner's manual
- 2007, 2012 P3 Shallow woofer break-in Product Advisory
Show all Knowledge Base topics
Ask Our Experts
Return Authorization
Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.
Wiring Wizard
Available Wiring Diagrams
Please consult your amplifier owner's manual for lowest recommended impedance.
Wiring Diagram #1
Wiring Diagram #2
Wiring Diagram #3
Wiring Diagram #4
Wiring Diagram #5
Wiring Diagram #6
Wiring Diagram #7
Wiring Diagram #8
Wiring Diagram #9
Speaker Polarity
Your woofer may use one of the following to identify (+/-) terminals.
Positive +
Red Post
Purple (4Ω)
Red (8Ω)
Negative -
Black Post
No Dot
No Dot
Exceptional Sound Quality
Auto Sound Design – a friendly, locally-owned company specializing in audio installation and equipment. We value quality and believe that our customers should have the best sound systems in their vehicles. Our top of the line technologies and personalized solutions make us a top choice for anyone looking to upgrade their audio system in their vehicles, we even do audio installations for boats!
FAQs