KAC-M3004
KAC-M3004
- Compact 4-Channel Digital Amplifier
PLEASE CALL FOR PRICING.
General Features
RMS POWER Output 4Ω: 50W x 4
RMS POWER Output 2Ω: 75W x 4
RMS POWER Output Bridged: 150W x 2
Dimensions(WxHxD): 6-1/2" x 1-3/4" x 3-7/8"
Singal Sensing Turn-on
Conformal Coating
*1
*1: Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.
Multi-Application
Many of today’s powersports have very limited space to work in and tend to be a harsh environment for electronics because of the exposure to outdoor environments. KENWOOD’s compact performance amplifiers are small in size so they fit even the most limited installation areas. The amplifiers also use a conformal coated main PCB (printed circuit boards) which offer extra layers of protection to help prevent moisture or damp air from damaging the product.
Specifications
CTA-2006-D Value
| Maximum Dynamic Power | 65W at 4ohms and ≤ 10% THD + N |
|---|---|
| Continuous Power Output | 50W at 4ohms and ≤ 1% THD + N |
| Signal to Noise | 76dBA reference 1 Watt RMS |
Maximum Power Output
- 600W
Specifications
| Signal to Noise Ratio | 89dB (Reference: Rated Power into 4Ohms at 14.4V) |
|---|---|
| Frequency Response | 20Hz-20kHz (+0dB, -1dB) |
| Input Impedance | 10k ohm |
| Speaker Impedance | 4Ω (2Ω to 8Ω allowable) |
| Bridged connection | 4Ω to 8Ω allowable |
Audio Section
| Low-Pass Filter | Built in Variable Low-Pass Filter (50Hz-200Hz, -12dB/oct) |
|---|---|
| High-Pass Filter | Built in Variable Low-Pass Filter (50Hz-200Hz, -12dB/oct) |
| Filter Selector 1 | LPF-OFF-HPF |
| RCA Input Sensitivity | 0.2 V - 5.0 V |
| Speaker Level Input Sensitivity | 4.0 V - 12.0 V |
Terminals
| Battery & Ground | Screw Type Terminal Block (Ni) (M4) |
|---|---|
| Speaker Output | MOLEX Connector with AWG16 200mm Wire |
| Line In | RCA (Ni) |
General
| Dimensions(WxHxD) | '6-1/2 X '1-3/4 X '3-7/8 inch |
|---|---|
| Weight(kg) | - |
| Operating Voltage | 14.4V（11-16V allowable） |
| Current Consumption | 22 A |
- CEA-2006 Compliant
- Class D
- 2 Ohms Load Capability
- Speaker Level Input
- Signal Sensing Turn-on
- Power MOS-FET Switching Power Supply
- Extruded Aluminum Heat Sink Design
- Triangle Indicator
Exceptional Sound Quality
Auto Sound Design – a friendly, locally-owned company specializing in audio installation and equipment. We value quality and believe that our customers should have the best sound systems in their vehicles. Our top of the line technologies and personalized solutions make us a top choice for anyone looking to upgrade their audio system in their vehicles, we even do audio installations for boats!
FAQs